Can-Am Street Legal Kits

 

Can-Am Maverick X3 LED Turn Signal Kit

 

Can-Am Street Legal Kits

Looking for Can-Am Street Legal Kits to make your Can-Am Commander street legal or Can-Am Maverick street legal.  Similarly, your Can-Am Maverick X3 street legal or Can-Am Maverick Trail street legal.  Likewise, your Can-Am Defender street legal or Can-Am Outlander street legal.  You have come to the right place!  Hence, we have developed D.O.T. approved Can-Am street legal kits that will help you make your UTV (side-by-side) or ATV (quad) street legal.

For instance, having a Street Legal Can-Am UTV or ATV is just awesome.  In other words with the right Can-Am street legal kits, you can really tackle every type of terrain,  That is to say you can go from pavement, to off-road trails and back again.  Subsequently, we build the Can-Am street legal kits and accessories you need.  Consequently, to make your UTV (side-by-side) or ATV (quad) street legal.  For instance, D.O.T. approved Horn Kits, LED Lighted License Plate Brackets and LED Turn Signal Kits.  As a result you can safely and effectively ride on the streets in your area.

 

Can-Am Street Legal Kits D.O.T. Requirements

Our Can-Am Street Legal Kits are intended to help you convert your off-road UTV (side-by-side) or ATV (quad) to a street legal ride in many states.  In addition, our kits include parts that are actually D.O.T. approved items.  That is to say you will need these while converting your off-road recreational vehicle to street legal status.  Be careful, as some of our competitors out their Do Not use D.O.T. approved parts.  Consequently they will sell you a kit that it is not D.O.T. approved.

All states have their own D.O.T. requirements for street legal equipment.  On the other hand, check with your local Department of Motor Vehicles (DMV) or Motor Vehicle Division (MVD).  Certainly get the information for your local requirements.  Furthermore, most states require a Horn (120 db+), Lighted License Plate and Turn Signals.  However, not all states require turn signals (hand signals are ok).  Above all we highly recommend turn signals for your added safety.  That is to say, we know through experience that some drivers DO NOT know what hand signals are.

 

Why Our Can-Am Street Legal Kits are Completely Independent

I get asked a few times every month, why don’t you use the UTV or ATV rear OEM lights for the rear turn signalsThe answer is very simple.  I developed my Turn Signal Kits (TSK) to be completely independent for THREE main reasonsONE, you do not want any possible feedback from the LED Electronic Flasher into the ECU of your UTV or ATV.  Consequently, electronic feedback can cause problems with your ECU and they are very expensive to replace.  TWO, you do not want to affect (invalidate) your manufactures warranty by tapping into any existing OEM lights or wiringTHREE, you want both rear stop lights when activating the turn signals (like our automobiles), not just one.  As a result, with all my different Can-Am street legal kits you will never have these concerns or issues.

 

Get Only What Can-Am Street Legal Kits You Need!

For example, you may only need turn signals + a license plate bracket, because you already have a horn.  Therefore we make the Can-Am street legal kits separate, so you can order just what you need or want.

 


Can-Am Street Legal Kits

Horn Kit

(Stock #310) / (Price: $39.95)

Can-Am Outlander Horn Kit #310

The Loud FIAMM 12 Volt Horn Kit is one of our ATV and UTV Can-Am street legal kits.  First of all this horn kit is for making your recreational vehicle street legal or letting those around you know you’re there.  Furthermore, Most states require the horn to be 120 db or more, ours is 130 db, very loud, legal & D.O.T. approved in all states.  In addition this 12 volt horn kit comes complete with all the parts, wiring and instructions with diagrams.

We use a FIAMM horn in our kit.  Above all FIAMM is recognized as the world’s leading producer of horns.  Most importantly the smaller size makes it easy to install.  Even more, on any ATV (quad) or UTV (side-by-side), and with great quality for a loud sound.  In addition it exceeds the S.A.E. and O.E.M. specifications for a wide range of vehicle applications.

 

Can-Am Street Legal Kits Horn Installation

This kit can be easily installed in about 30 minutes, it does not go into any factory wiring and above all it will not void your manufactures warranty!  In addition, there is no cutting or splicing and it comes with all parts needed for your install.  Note: First of all, you need to drill a 3/16th inch hole (or use an existing hole) in the frame to mount the FIAMM horn.  In addition, drill a 1/2″ inch hole in the dash to mount the horn button.  Finally, this horn kit is pretty much plug-n-play and is very simple to install.

Read More & Add to Cart

 

 


Can-Am Street Legal Kits

LED License Plate Bracket

(Stock #312) / (Price: $18.95)

Can-Am Commander LED License Plate Bracket #312

The LED Lighted License Plate Bracket is one of our ATV and UTV Can-Am street legal kits.  Consequently this is for making your recreational vehicle street legal in those states requiring a 7″ x 4″ license plate.  Furthermore, the License Plate Bracket comes complete with the mounting hardware, extra wire, connectors, wire ties and the installation/wiring instructions.  In addition the LED license plate bracket can be easily installed in less than 30 minutes.

 

Can-Am Street Legal Kits LPB Specifications

This is a 12 volt LED chrome-plated license plate light with rust proof non-corrosive black polymer (plastic) license plate bracket.  Firstly, the LED light includes both power (+) and ground (-) wires.  In other words the bracket can be mounted to any surface.  Secondly, the LED license plate light will last years with no bulbs to vibrate loose or burn out.  Thirdly, the Sturdy Rust Proof Non-corrosive Plastic Frame has 2 sets of mounting holes for attachment to your UTV or ATV.  Their are 2 wire leads, so you can mount the bracket anywhere on the rear of your UTV or ATV.  Finally, it will hold your 7” x 4” license plate to make your UTV or ATV Can-Am Street Legal in those states requiring a license plate.

Read More & Add to Cart

 

 


Can-Am Street Legal Kits

Column Mounted (TSS) Hardware Notes

Can-Am Commander Turn Signal Switch

 

Standard (TSS) Mounting Hardware Notes

All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware.  Used with our stock #104 or #107-SM LED Turn Signal Kits. As a result, order from the drop down box Turn Signal Switch (TSS) Options.

  • Can-Am Maverick X3 all models (2017-20)

If you have 3″ inches or more of clear steering column space, the Standard Turn Signal Switch (TSS) mounting hardware will work great!

⇔⇔⇔⇔⇔⇔⇔⇔⇔⇔

2011-20 Can-Am Commander / MAX / 2013-18 Can-Am Maverick / MAX (not X3 or Trail) models (TSS) Mounting Hardware Notes

The 2011-20 Can-Am Commander / MAX and the 2013-18 Can-Am Maverick / MAX (not X3 or Trail) models use our Custom Turn Signal Switch (TSS) Mounting Bracket.  Furthermore this custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Used with our stock #104 or #107-SM Turn Signal Kits.  As a result, order from the drop down box Turn Signal Switch (TSS) Options.

  • 11-20 Can-Am Commander / MAX TSS Bracket
  • 13-18 Can-Am Maverick / MAX TSS Bracket
    (not for X3 or Trail models)
  • 17-20 Can-Am Maverick X3 – Uses the Standard TSS Hardware

⇔⇔⇔⇔⇔⇔⇔⇔⇔⇔

Cam-Am Defender, Maverick Trail and ATV Quads

2016-20 Can-Am Defender / MAX all models, we recommend you use our Toggle Switches LED Turn Signal Kit (stock# 604).

2018-20 Can-Am Maverick Trail all models, we recommend you use our Toggle Switches LED Turn Signal Kit (stock# 604).

All Can-Am ATV (Quad) models, we recommend you use our Toggle Switch LED Turn Signal Kit (stock# 604).

 

 


Can-Am Street Legal Kits

SM LED Turn Signal Kit

(Stock #104) / (Base Price: $129.95)

Can-Am Commander LED Turn Signal Light Kit

The SM LED Turn Signal Kit with surface mount Super Bright D.O.T. approved LED lights (no brackets required).  In addition, our SM LED light kit comes with 2 surface mounted ¾” inch amber (front) LED lights.  Also, 2 surface mounted ¾” inch red (rear) LED lights.  However, you can add additional lights to give your Can-Am street legal UTV a custom look.

 

Can-Am Street Legal Kits Specifications

This SM LED light kit comes with a column mounted turn signal switch.  First of all, it has a pilot light for the turn signals and 4-way emergency flashers (hazard warning).  Secondly, the turn signal switch has a pull out flare tab for the 4-way hazard lights.  Finally, it comes with the hardware to mount it to your steering column.

The four Surface Mounted LED Super Bright Lights are ¾” inch round with an attached rubber grommet for quick mounting.  Secondly, they are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required).  Thirdly, these SM LED’s are D.O.T. approved.  In addition, they meet the P2PC requirements for 45 degree mounting and provide superior light output.  Furthermore, they have a Space Saving Design, Hi Impact Acrylic Lens and Housing.  Finally, they have Completely Resin Sealed Electronics to eliminate corrosion.

This special LED Flasher has the 3 pin connections for LOAD, PILOT and POWER.  Also, the electronic LED flasher is quite, no annoying clicking sounds.

Our kit includes:  2 Amber and 2 Red SM LED super bright lights with grommets.  Secondly, the Turn Signal Switch with the hardware to mount it to your steering column (see TSS mounting hardware notes above).  Also, the LED Flasher with mounting hardware.  Furthermore, an ATC in-line fuse holder with a 3 amp fuse.  In addition, the mounting installation instructions with wiring instructions & diagram.  Most importantly, with our Can-Am street legal kits you get all the help and support you need from EZ Turn Signal Kits.

 

Important Note

Note FYI:  I have heard people say that a column mounted Turn Signal Switch (TSS) is in the way of you entering and exiting the unit, not true!  Secondly, they say you will bump the TSS lever with your legs and even break that lever, again not true!  In other words, I am 6’3″ and 250 pounds, I have never bumped the TSS and I use my units multiple times a day.  Finally, I have sold thousands of the column mounted TSS and never had a customer complain about bumping or breaking one.

 

Can-Am Street Legal Kits Installation

This kit can be easily installed, it does not go into any factory wiring and above all it will not void your manufactures warranty!  In addition, each wire has a different color and the wiring diagram shows where each colored wire goes.  Above all, I include my phone number and e-mail address with the instructions.  Therefore, if you have any questions about your installation you can contact me.

This turn signal switch has been installed on thousands of units, very nice and easy to operate.  The Motor Vehicle Department and your local police departments will be impressed.  Most noteworthy, everyone who rides on the street or off road (dunes/congested areas), should have turn signals for their added safety.

The SM LED Turn Signal Kit will fit most of the Can-Am UTV side-by-side models (check the TSS mounting hardware notes above).

In addition you can customize the UTV with Double or Triple lights, order from the drop down box Light Options:  Double Lights: 4 Amber & 4 Red lights  or  Triple Lights: 6 Amber & 6 Red lights.

Likewise you may want amber lights front and rear, order from the drop down box Light Options:  Amber Kit:  All 4 Amber lights  or  Double Lights All Amber: 8 Amber lights  or  Triple Lights All Amber: 12 Amber lights.

 

Can-Am Street Legal Kits Options

SM LED Turn Signal Kit #104 Options:

Option1 – Double or Triple Lights for a custom look!

Option2 – Turn Signal Switch (TSS) mounting hardware for your particular year, make and model.

Option3 – UTV Wire and Connector Kit, to clarify this kit will make it easy to connect your turn signals.

Option4 – Dash Indicators for those that want one or two dash indicators.

You can order whatever options you want with your Turn Signal Kit by using the drop down (∇) menus.

 

Choose Your Options & Add to Cart

Choose Your Options & Add to Cart

 

 


Can-Am Street Legal Kits

SM LED Running Lights & Turn Signal Kit

(Stock #107-SM) / (Base Price: $169.95)

LED Running Lights & Turn Signal Kit #107-SM

This is a 12 volt LED Running Lights & Turn Signal Kit with surface mount Super Bright D.O.T. approved LED lights (no brackets required).  In addition, our SM LED dual mode light kit comes with 2 surface mounted ¾” inch amber (front) LED lights.  Also, 2 surface mounted ¾” inch red (rear) LED lights.  However, you can add additional lights to give your Can-Am street legal UTV a custom look.

 

Can-Am Street Legal Kits Specifications

This SM LED running lights & turn signal kit comes with a column mounted turn signal switch.  First of all, it has a pilot light for the turn signals and 4-way emergency flashers (hazard warning).  Secondly, the turn signal switch has a pull out flare tab for the 4-way hazard lights.  Furthermore, it comes with the hardware to mount it to your steering column.

The four Surface Mounted LED Dual Mode Super Bright Lights are ¾” inch round with an attached rubber grommet for quick mounting.  Secondly, they are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required).  Furthermore, they have 3 lead wires each, one for ground, one for normal mode (running) and one for high mode (signals).  In addition, they meet the P2PC requirements for 45 degree mounting and provide superior light output.  Furthermore, they have a Space Saving Design, Hi Impact Acrylic Lens and Housing.  Finally, they have Completely Resin Sealed Electronics to eliminate corrosion.

This special LED Flasher has the 3 pin connections for LOAD, PILOT and POWER.  Also, the electronic LED flasher is quite, no annoying clicking sounds.

The Running Light Switch is a LED waterproof illuminated rocker switch.  Above all, it is easy to install, vibration resistance, and will illuminate when activated.

 

SM LED Running Lights & Turn Signal Kit

Our SM LED Running Lights & Turn Signal Kit includes.  2 Amber and 2 Red SM LED Dual Mode super bright lights with grommets.  Secondly, the Turn Signal Switch and the hardware to mount it to your steering column (see TSS mounting hardware notes above).  Also, a waterproof LED rocker switch and special LED Flasher with mounting hardware.  Furthermore an ATC in-line fuse holder with a 3 amp fuse.  In addition, the mounting installation instructions with wiring instructions & diagram.  Most importantly, with our Can-Am street legal kits you get all the help and support you need from EZ Turn Signal Kits.

 

Important Note

Note FYI:  I have heard people say that a column mounted Turn Signal Switch (TSS) is in the way of you entering and exiting the unit, not true!  Secondly, they say you will bump the TSS lever with your legs and even break that lever, again not true!  In other words, I am 6’3″ and 250 pounds, I have never bumped the TSS and I use my units multiple times a day.  Finally, I have sold thousands of the column mounted TSS and never had a customer complain about bumping or breaking one.

 

Can-Am Street Legal Kits Installation

This kit can be easily installed, it does not go into any factory wiring and above all it will not void your manufactures warranty!  In addition, each wire has a different color and the wiring diagram shows where each colored wire goes.  Above all, I include my phone number and e-mail address with the instructions.  Therefore, if you have any questions about your installation you can contact me.

This turn signal switch has been installed on thousands of units, very nice and easy to operate.  The Motor Vehicle Department and your local police departments will be impressed.  Most noteworthy, everyone who rides on the street or off road (dunes/congested areas), should have turn signals for their added safety.

The SM LED Running Lights & Turn Signal Kit will fit most of the Can-Am UTV side-by-side models (check the TSS mounting hardware notes above).

In addition you can customize the UTV with Double or Triple lights, order from the drop down box Light Options:  Double Lights: 4 Amber & 4 Red lights  or  Triple Lights: 6 Amber & 6 Red lights.

 

Can-Am Street Legal Kits Options

SM LED Running Lights & Turn Signal Kit #107-SM Options:

Option1 – Double or Triple Lights for a custom look!

Option2 – Turn Signal Switch (TSS) mounting hardware for your particular year, make and model.

Option3 – UTV Wire and Connector Kit, to clarify this kit will make it easy to connect your turn signals.

Option4 – Dash Indicators for those that want one or two dash indicators.

You can order whatever options you want with your Turn Signal Kit by using the drop down (∇) menus.

 

Choose Your Options & Add to Cart

Choose Your Options & Add to Cart

 

 


Can-Am Street Legal Kits

UTV / ATV Toggle Switches

LED Turn Signal Kit

with Emergency Flashers

(Stock #604) / (Base Price: $89.95)

Can-Am Outlander LED Turn Signal Light Kit #604

This is a 12 volt Toggle Switches LED Turn Signal Kit with surface mount Super Bright D.O.T. approved LED lights (no brackets required).  Our Toggle Switches (TS) LED light kit comes with 2 surface mounted ¾” inch amber (front) LED lights.  In addition, 2 surface mounted ¾” inch red (rear) LED lights.  However, you can add additional lights to give your Can-Am street legal UTV or ATV a custom look.

 

Can-Am Street Legal Kits Specifications

This Toggle Switches LED Turn Signal Kit comes with two toggle switches.  In addition, 2 LED indicator lights for the Turn Signals and 4-way Emergency Flashers (hazard warning).

The four Surface Mounted LED Super Bright Lights are ¾” inch round with an attached rubber grommet for quick mounting.  Secondly, they are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required).  In addition, they meet the P2PC requirements for 45 degree mounting and provide superior light output.  Furthermore, they have a Space Saving Design, Hi Impact Acrylic Lens and Housing.  Finally, they have Completely Resin Sealed Electronics to eliminate corrosion.

This special LED Flasher has the 3 pin connections for LOAD, PILOT and POWER.  Also, the electronic LED flasher is quite, no annoying clicking sounds.

Our toggle switches LED turn signal kit includes.  2 Amber and 2 Red SM LED super bright lights with grommets.  Secondly, two (2) Toggle Switches and two (2) LED indicator lights for the turn signals and 4-way emergency flashers.  Also, the LED Flasher with mounting hardware.  Furthermore, an ATC in-line fuse holder with a 3 amp fuse.  In addition, the mounting installation instructions with wiring instructions & diagram.  Most importantly, with our Can-Am street legal kits you get all the help and support you need from EZ Turn Signal Kits.

 

Can-Am Street Legal Kits Installation

This kit can be easily installed, it does not go into any factory wiring and above all it will not void your manufactures warranty!  In addition, each wire has a different color and the wiring diagram shows where each colored wire goes.  Above all, I include my phone number and e-mail address with the instructions.  Therefore, if you have any questions about your installation you can contact me.

These turn signal toggle switches are very nice and easy to operate.  The Motor Vehicle Department and your local police departments will be impressed.  Most noteworthy, everyone who rides on the street or off road (dunes/congested areas), should have turn signals for their added safety.

Note:  The steering column mounted turn signal switch is the safest and easiest to operate.  Most Importantly, we always recommend that you install a steering column mounted turn signal switch kit.  To clarify, we recommend our (stock# 104, 105 or 107-SM) on a UTV side-by-side (if you have the steering column space), for your added safety.  In other words, a steering column mounted turn signal switch is located in the same area as your automobile.  To clarify, it comes natural for activating while keeping your eyes on the road.

The Toggle Switches LED Turn Signal Kit will fit all years for the Can-Am UTV & ATV models.

In addition you can customize the UTV/ATV with Double or Triple lights, order from the drop down box Light Options:  Double Lights: 4 Amber & 4 Red lights  or  Triple Lights: 6 Amber & 6 Red lights.

Likewise you may want amber lights front and rear, order from the drop down box Light Options:  Amber Kit: All 4 Amber lights  or  Double Lights All Amber: 8 Amber lights  or  Triple Lights All Amber: 12 Amber lights.

 

Can-Am Street Legal Kits Options

Toggle Switches LED Turn Signal Kit #604 Options:

Option1 – Double or Triple Lights for a custom look!

Option2 – TS Wire and Connector Kit, to clarify this kit will make it easy to connect your turn signals.

You can order whatever options you want with your Turn Signal Kit by using the drop down (∇) menus.

 

Choose Your Options & Add to Cart

Choose Your Options & Add to Cart

 

Please let us know if you have any questions or need assistance, you can call us at (623) 435-1337 or send an e-mail to Cisco@LEDTSK.com

 

Have you seen the new Can-Am models?