LED Off-Road Light Kit

This LED Off-road Light Kit will help you navigating a vehicle at night or in dark areas.  In other words with our LED off-road light kit you can activate the switch at any time to see, not just when you are driving.  That is to say, when it gets dark, it gets hard to see anything.  To clarify, with our LED Off-road Light Kit you can turn the lights on whenever you need light!

(Stock #340) / (Base Price: $129.95)

LED Off Road Lights Kit

Meanwhile, watch the picture (above) change from the stock LED lights on a RZR to our LED Off-Road Light with a Flood Beam (60 degree) Pattern.  Note: To clarify, the distance from the RZR to the Warehouse Building is 150′ feet.

Are you tired of running down the battery because your off road lights are drawing 2 or 3 times what your charging system is putting back?  Subsequently, LED off-Road lights only draw about 1/4th the power most other off road lights do.  Hence, they will save your battery and the abuse on your charging system.

 

LED Off-Road Light Kit Specifications

With our LED Off-Road Light Kit we give you two (2) lights.  First of all, you can adjust the lights to fit your lighting needs with both up/down and left/right adjustments.  Secondly, this design offers great style, performance and fitment to virtually any off road vehicle.  In addition these LED off road lights will brighten up any trail to help you with your nighttime driving.  Finally, if you want to make driving at night safer and more enjoyable then this LED Off-Road Light is for you.

The LED Off-Road Light Kit has two lights which are 5.4” inches tall w/mounting hardware x 4.6” inches round x 3” inches deep.  First of all, they have 14 High Intensity Bright LED’s, with a Flood Beam (60 degree) Pattern and work on 9-32V DC input voltage.  Secondly, they put out 2580 Lumens each for a total of 5160 Lumens and only draw 5.6 amps total with both lights on.  In addition they come with a Stainless Steel 3/8 x 7/8” inch bolt and mounting hardware.  They have a black aluminum housing, clear polycarbonate lens and most noteworthy are rated for 30,000 hours.

 

LED Off-Road Light Kit Fitment

The LED Off-Road Light Kit will fit. Polaris:  Ranger XP, HD, HO, Deluxe, Crew, Diesel, 6×6, Brutus, High Lifter.  The Polaris TM, EV, ETX, 400, 425, 500, 570, 700, 800, 900, 1000, Full-size & Mid-size models.  Polaris Razor RZR, S, 4, 570, 800, 900, 1000, XP, XP-4, XC, Trail, Turbo, High Lifter models.  The Polaris General, ACE, Sportsman, Magnum, Hawkeye & Trail Boss models.  Yamaha:  Rhino, Viking, Wolverine, YXZ, Grizzly & Kodiak  models,  Can-Am:  Commander, Maverick, Max, X3, Trail, Defender & Outlander models.  Kawasaki:  Teryx, Mule, Mule Pro, SX, Brute Force, Bayou & Prairie models.  Arctic Cat / Textron:  Prowler, HDX, Stampede, HAVOC, Wildcat, MudPro & Alterra models.  Honda:  Big Red MUV, Pioneer, FourTrax, Foreman, Rancher, Rubicon, Rincon & Recon models.  Gravely:  Atlas JSV models and the Mahindra:  ROXOR models.  Coleman:  Outfitter models  and  the Cub Cadet:  Volunteer Tracker models.

This LED off-road light will fit all years, makes and models of UTVs, ROVs and ATVs.  In conclusion, this kit can be easily installed on any recreational vehicle UTV (side-by-side) & ATV (quad).  Likewise any ROV, MUV, JSV, Golf Cart, Bobcat, Kubota, Argo, Gator XUV, Club Car, Sand Car, Dune Buggy, etc

 

LED Off-Road Light Kit Installation

Our LED off-road light kit includes all parts needed to install off road lights on your recreational vehicle (see options).  Most importantly, the LED rocker switch will allow you to activate the LED off-road lights when needed.  The kit comes complete with wire and connectors.  Even more, the wire cable will make it easy to connect the LED off-road lights to the LED rocker switch.

Mounting the LED Off-Road Lights:  The LED off-road lights mount in a 3/8″ inch hole.  In addition most of the newer UTVs & ATVs come with mounting tabs or locations for mounting AUX lights.  Furthermore, you can drill a 3/8″ inch hole in some cases where you want to mount the light.  Finally, you can use a vinyl/rubber coated, plastic, aluminum billet or steel clamp that will allow you to mount the light to the roll cage or bumper (optional).

 

Choose Your Options & Add to Cart

Choose Your Options & Add to Cart

 

Please let us know if you have any questions or need assistance, you can call us at (623) 435-1337 or send an e-mail to Cisco@LEDTSK.com

 

In addition, have you seen all our Accessories?

Also, have you seen all our Street Legal Kits?

Have you seen the new Polaris models?